Sunday Through Saturday; Open Early Begin - Bosch B9512G Program Entry Manual

Control Panel
Opening/Closing Windows Table
Use this table to determine the proper entries for your application.
Day of week
Program at least
one day as YES
Program at least
one day as YES
Program at least
one day as YES
All days must be
programmed NO
11.1.3

Sunday through Saturday

Default (Sunday through Saturday): No
Selections: Yes/No
In the seven weekday parameters, select the days of the week that the opening and/or closing
windows are active.
To prevent the windows from activating on certain days of the year, set Xept Holiday, page 215
to Yes, and enable at least one holiday index. When Xept Holiday, page 215 is set to Yes, the
window executes on the days of the week programmed unless the date is designated as a
holiday by the selected holiday index.
If opening and/or closing windows are only needed on certain days of the year, do not
program the windows to execute on any days of the week. Instead, set Xept Holiday, page 215
to No, and select a holiday index with the days of the year you want the window to be active.
RPS Menu Location
Schedules > Open/Close Windows > Sunday through Saturday
11.1.4

Open Early Begin

Default: Disable
Selections: Disable, HH:MM (hours and minutes) 00:00 to 23:59
Bosch Security Systems, Inc.
The column Except on
below briefly holiday
describes the
ways to activate
an Opening/
Closing window.
Use the
guidelines shown
in the other
columns to
choose the
appropriate
entries.
Days(s) of the NO
week
Day(s) of the YES
week, but NOT
on holidays
Day(s) of the NO
week, PLUS
holidays
Only on holidays NO
Program Entry Guide
Schedules | en 209
Holiday index Areas
None Program at least
on area as YES
Select at least Program at least
one Index on area as YES
Select at least Program at least
one Index on area as YES
Select at least Program at least
one Index on area as YES
2017.03 | 09 | F.01U.303.998