1-2-2.
Disassembling "UNIT, MECHANISM"
1.
Disassembling "LEVER, INTERLOCK SENSOR-03"
Detach "SPRING, LEVER INTERLOCK" from the hook at "FRAME, MAIN-03".
Remove "SHAFT, LEVER" that secures "FRAME, MAIN-03" and "LEVER, INTERLOCK SENSOR".
SHAFT, LEVER
SPRING, LEVER INTERLOCK
2.
Disassembling "HOLDER, PAPER-03"
Contract "SPRING, POP UP-03" and remove it toward you.
Move down "POP UP, COVER", align the lugs on the right and left with the notches at "FRAME,
MAIN-03", and pull it out toward you.
Remove one "SCREW, BHT (BT), M3.0 6" that fastens "FRAME, MAIN-03" and "HOLDER,
PAPER-03" from the right and left sides. Remove one "SCREW, BHT (ST), M3.0 6" that fastens
"BASE, HEAD" from the right and left sides.
SPRING, POP UP-03
SCREW, BHT (BT), M3.0 6
SCREW, BHT (ST), M3.0 6
- 15 -
CT-S310II Series Service Manual
Align the lugs with the notches
and pull out "POP UP, COVER".
POP UP, COVER