Other Situations - Canon CLC5151 Sending And Facsimile Manual

Other Situations

Transmissions are slow.
Q
A
Fax transmissions are slow (if the optional Super G3 FAX Board is installed).
Q
A
Q
A
Cannot use fax information services (if the optional Super G3 FAX Board is installed).
Q
A
Q
A
13
13-8
When Problems Occur
Are documents being sent at a high resolution?
It is recommended that you send documents containing text only in a lower resolution. (See
"Resolution," on p. 3-13.)
Is the ECM TX or ECM RX set to 'On'?
Set ECM TX and ECM RX to 'Off'. (See "ECM Transmission," on p. 9-42, and "ECM
Reception," on p. 9-47.)
Was the original type set to 'Text/Photo' when sending the document?
Select 'Text' from the Original Type drop-down list if the original does not contain any photos.
(See "Scan Exposure and Original Type Settings," on p. 3-15).
If your machine is connected to a rotary pulse line, is your machine set for tone dialing?
Set the machine for tone dialing to use fax information services. (See "Fax Information
Services," on p. 7-9.)
Did you receive an instruction from the sender to set the machine to receive?
Press [RX Start]. (See "Fax Information Services," on p. 7-9.)