Canon CLC5151 Sending And Facsimile Manual page 85

6
Select a folder on the specified server in which you want to log on to ➞
press [Log In].
If no folder is displayed, press [Log In] to log on to the Novell server.
To go down one level, press [Down].
To move up one level, press [Up].
7
Enter your user name and network password.
❑
Specify each setting ➞ press [OK].
[User]:
Press [User] ➞ enter your user name ➞ press [OK].
[Password]:
Press [Password] ➞ enter your network password ➞ press [OK].
After pressing [OK], the password that you entered appears as asterisks (********) on the
Enter Network Password screen.
IMPORTANT
Searching for a destination via an LDAP server is not possible if the time setting of the server and
the time setting of the machine are more than five minutes apart. If you cannot send even when
the user name and password are correct, check the time settings on the server and the machine.
8
Press [Down] ➞ select the folder to where you want to send your file ➞
press [OK].
To move up one level, press [Up].
9
Confirm your settings ➞ press [OK].
Specifying Destinations Using the New Address Tab
2
2-23