Different Size Originals
This mode enables you to scan different size originals together.
IMPORTANT
• The Different Size Originals mode cannot be used with the Document Size Select (Other Size or Long
Strip Original), 2-Page Separation, Original Frame Erase, or Book Frame Erase mode.
• The Different Size Originals mode cannot be used when sending a fax document in the Direct Sending
or Manual Sending mode.
• If Document Size Select setting is set to anything other than [Auto], all of the originals are scanned in
the specified size. If you want to scan the originals in their original sizes, make sure to set Document
Size Select to [Auto].
• If the originals are placed in the feeder, make sure that the different size originals are of the same weight
3
(paper type).
• Align the top edge of the originals with the back edge of the feeder if you are placing originals with
different widths.
• If you send different sized originals via fax, the paper size used to output the faxes on the recipient's
machine is the size of the largest document you sent. For example, if you send an A4 and A3 original via
fax, they will both be output on A3 paper at the recipient's machine.
• Paper Size in which the width of leading edge of each page are different (e.g., A3 and A5) cannot be fed
together.
• If you place originals with different widths into the feeder, the originals may move slightly when fed to the
platen glass. As a result, the images may be scanned and copied as slanted.
• If the Different Size Originals mode is set, the scanning speed may be slower than normal.
NOTE
To cancel this setting, press [Different Size Originals]
3-6
Scan Settings
➞
[Cancel].