Editing Address Details - Canon CLC5151 Sending And Facsimile Manual

Editing Address Details

You can change destination details as necessary.
1
Press
2
Select the destination to be changed ➞ press [Edit].
Press the alphanumeric keys (e.g., [ABC]) to display the individual keys for each letter or
number. You can select a letter or number to restrict the displayed range of entries. Press [All]
to return to the full address list.
You can restrict the type of destinations displayed in the results list by pressing the Type
drop-down list.
Press the Address Book drop-down list to display a list of subaddress books 1 to 10.
Subaddress books categorize the addresses stored in the Address Book.
You cannot select a one-touch button stored in a subaddress book.
If you select [All] in the Address Book drop-down list, the destinations stored in the one-touch
buttons are displayed. However, you cannot edit these destinations. For instructions on storing
and editing one-touch buttons, see "Storing/Editing One-Touch Buttons," on p. 10-40.
If you select a destination that is stored with an access number, press [Access Number] and
then enter the access number using
the destinations that are not managed with an access number are displayed.
NOTE
[Access Number] is displayed on the screen only if Access Number Management in Restrict the
Send Function in System Settings (from the Additional Functions screen) is set to 'On'. (See
"Access Number Management," on p. 11-19.)
➞ [Address Book Settings] ➞ [Register Address].
- (numeric keys). If you press [No Access Number],

Editing Address Details

10
10-35