Table of Contents
Advertisement
5
Enter the receiving party's fax number, then press [Start/Copy] twice.
• The fax scans the document into memory.
• You can enter the receiving party's fax number using the numeric buttons, one-touch speed dialling, coded speed dialling, or
directory dialling (see pp. 28, 29).
• If you use the numeric buttons, press [Start/Copy] after entering the number to register it.
6
When the set time comes, the fax dials and sends the document.
Delayed sequential broadcasting is applicable for sending one document to more than one location at a later time when multiple
fax numbers are dialled (see p. 33).
Sending other documents while the fax is set for delayed
sending
You can send, receive, and copy other documents even when the fax is set for sending at a preset time.
To send or copy other documents after setting the fax for delayed sending, simply send or copy using any other
sending procedure in this guide.
Cancelling delayed sending
1
Press [Function].
2
Use [
] or [
3
Use [
] or [
Copy].
4
Use [
] or [
document you want to delete, then press [Start/Copy].
• If the LCD does not change after you press [
stored in memory.
• If you are unsure of the transaction number (TX/RX NO.), print the Doc. memory list (see p. 33).
5
Press
to delete the document.
If you want to continue sending, press [#].
6
Press [Stop].
The fax returns to standby mode.
32
] to select MEMORY REFERENCE, then press [Start/Copy].
] to select DELETE DOCUMENT, then press [Start/
] to select the transaction number (TX/RX NO.) of the
] or [
], this means only one transaction is
TX/RX NO.
0001
YES=( )
NO=(#)
Advertisement
Table of Contents
