Canon CLC5151 Sending And Facsimile Manual page 189

3
Specify whether to divide your documents into separate pages ➞
press [OK].
If you want to separate multiple images and send them as separate files, each of which consists
of only one page, press [Divide into Pages], and the key lights.
If you want to send multiple images as a single file without dividing them, do not press [Divide
into Pages], and the key remains unlit.
IMPORTANT
• If [Compact] is selected for the PDF file format, the resolution is automatically changed to
[300x300 dpi]. If the colour mode is set to [Auto-Color Select (Full Color/Black-and-White)] or
[Black and White], the colour mode is automatically changed to [Auto-Color Select (Full Color/
Grayscale)] or [Grayscale], respectively. If you want to send the document with the resolution
setting and the colour mode that you specify, change the PDF file format to anything other than
[Compact] or [Trace & Smooth].
• If [PDF (Compact)] is selected as the file format in Standard Send Settings in Edit Standard Send
Settings in TX Settings under <Common Settings> in Communications Settings (from the
Additional Functions screen) and you are sending documents by fax or I-fax, a message
prompting you to change the file format may appear on the screen. In this case, change the file
format to anything other than [PDF (Compact)] or [PDF (Trace)].
• If [PDF (Compact)] is selected as the file format, documents can be sent only at a zoom ratio of
100%.
NOTE
• To view a PDF file or to search a text in a PDF file, software that supports the PDF format (such
as Adobe Reader/Adobe Acrobat) is required.
• If you select [Compact], you can also set [OCR (Text Searchable)] at the same time. In that case,
[PDF (Compact)] is displayed as the file format on the Send Basic Features screen.
4
Press .
Setting the File Format to Send a Document in
5
5-33