Sending A Fax - Canon CLC5151 Sending And Facsimile Manual

Sending a Fax

You can scan originals and send them as faxes. This section describes the procedure for
specifying a sender's name.
NOTE
This mode is available only if the optional Super G3 FAX Board is installed.
■ Memory Sending
All of the originals to be sent are first scanned and read into memory, then sent. This means that you do
not need to stay near the machine once the originals have been scanned.
NOTE
The memory can hold a total of approximately 6,000 pages of sent and received documents.
■ Direct Sending
The machine sends each page of the document to the destination as it is scanned.
IMPORTANT
• With Direct Sending mode, you can send a document of two or more pages only when using the feeder.
You can only send one page at a time when you place your original on the platen glass.
• You can specify only one destination at a time for Direct Sending mode.
• Memory Sending is automatically set when using Delayed Send or when multiple destinations are
specified.
• If an error occurs or you cancel transmission in the Direct Sending mode, you can check how many
pages have been sent to the destination by printing the Fax Activity Report, or on the Log screen for
Fax on the System Monitor screen.
5-3
Sending Methods
5