Canon CLC5151 Sending And Facsimile Manual page 420

# 009
Cause 1
Remedy
Cause 2
Remedy
# 011
Cause
Remedy
# 012
Cause
Remedy
# 018
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
13
13-16
Error Messages
There is no paper.
Load paper. (See Chapter 7, "Routine Maintenance," in the Reference Guide.)
The paper drawer is not correctly inserted into the machine.
Insert the paper drawer properly.
The document that you are sending is not placed correctly.
Place the document properly into the feeder or on the platen glass, and try sending again.
The document could not be sent because the receiving fax machine was out of paper.
Ask the recipient to load paper into their fax machine.
The recipient's machine did not respond when your machine redialed.
Confirm that the recipient's machine is able to communicate, and then try again.
The documents could not be sent because the recipient's machine was performing another
task.
Confirm that the recipient's machine is able to communicate, and then try again.
The settings on your machine do not match the settings on the recipient's machine.
Check that the settings on your machine match those on the recipient's machine, and that the
recipient's machine is able to communicate, and try again.