Canon CLC5151 Sending And Facsimile Manual page 301

5
Press the Address Book drop-down list ➞ select one of the numbered
subaddress books.
Address Books 1 to 10 are used to divide the Address Book into 10 parts, called subaddress
books. This is a convenient way to classify destinations.
The I-fax address that you enter will be stored in the subaddress book that you select here.
6
Press the Mode drop-down list ➞ select [Simple] or [Full].
<Mode>:
[Simple]: Sends scanned data as an image via the Internet.
[Full]: Sends scanned data as an image via the Internet, and enables you to receive a
delivery confirmation message telling you whether your I-fax was sent successfully.
In order for you to receive a confirmation message telling you the delivery status of your I-fax
document, the recipient's machine must have I-fax capabilities and be compatible with the Full
mode.
NOTE
If you send documents using the Full mode to a machine that does not support the Full mode,
delivery confirmation cannot be carried out. When this happens, the job concerned is not
considered as complete even though the actual sending of the document is successful. Such
jobs are displayed as <Waiting for result...> on the Status screen until the time set for Full Mode
TX Timeout in E-mail/I-Fax Settings in Communications Settings in System Settings (from the
Additional Functions screen) has lapsed. After the timeout, the job is moved to the log, and the
result is shown as <-> when sending of the document to a server or other destination could not
be verified.
7
Press [I-Fax Address] ➞ enter the I-fax address ➞ press [OK].
NOTE
If you do not send documents via a server, and if the recipient's IP address is not registered with
a DNS server, enter the domain name in the following format: (user)@(the recipient's IP
address).
Storing New Addresses
10
10-15