Stamping Originals - Canon CLC5151 Sending And Facsimile Manual

7
Press [Start].
8
Press [Yes].
9
Verify the images ➞ press [Start Send].
You can press [
You can press [ ], [ ], [▼], or [▲] to specify the area to display when you zoom in or out on the
page.
When your image is enlarged or reduced, you can see the general location of which area you
are previewing with
NOTE
The number of scanned pages is displayed on the Send Process screen.

Stamping Originals

The machine can print a stamp (approximately 3 mm in diameter) on the front side of scanned
and sent originals.
Vertical Placement
IMPORTANT
• The Stamp mode cannot be used with the Document Size Select (Other Size), or 2-Page Separation
mode.
• The Stamp mode cannot be used when sending a fax document in the Direct Sending or Manual
Sending mode.
] (reduce) or [ ] (enlarge) to zoom in or out.
(above the reduce and enlarge icons).
Position at which
stamp is applied
Position at which
stamp is applied
Horizontal Placement
Sending Methods
5
5-23