Checking The Arrival Of A Receive Job - Canon CLC5151 Sending And Facsimile Manual

Checking the Arrival of a Receive Job

The machine regularly checks for the arrival of an I-fax. However, you can check for the arrival
of an I-fax at any time by performing the procedure below.
NOTE
This mode is available only if the Color Universal Send Kit (standard-equipped for the iR C4580i/iR
C4080i) is activated.
1
Press [System Monitor].
If necessary, see the screen shot in step 1 of "Checking Send Job Details," on p. 8-2.
2
Press [Receive] ➞ [Checking RX of I-Fax Jobs].
The screen below is displayed while the machine is checking for the arrival of an I-fax.
NOTE
To be able to use [Checking RX of I-Fax Jobs], you must first set the POP setting in E-mail/I-Fax
in Network Settings in System Settings (from the Additional Functions screen) to 'On' so that you
can receive documents using POP. (See Chapter 3, "Using a TCP/IP Network," in the Network
Guide.)
Checking/Changing the Status of Receive and Forwarded Jobs
8
8-15