Special Dialing
Enter fax numbers as described below when the CLC5151/CLC4040/iR C4580i/iR C4080i is
connected to an extension, or when you want to enter international fax numbers.
■ Calling from an Extension
When calling an outside line from an extension, the outside line access number (such as 0) is normally
dialed before the fax number of the destination. In the same manner, when the CLC5151/CLC4040/iR
C4580i/iR C4080i is connected to an extension, the outside line access number needs to be entered
before fax numbers. You can also enter a pause time (i.e., the amount of time the machine waits after
dialing the outside line access number when calling from an extension) together with these numbers.
■ International Dialing
You can enter a pause time (i.e., the amount of time the machine waits after dialing the international fax
number) together with an international fax number.
NOTE
This mode is available only if the optional Super G3 Fax Board is installed.
Calling from an Extension
This section describes only the procedure for entering fax numbers.
NOTE
For instructions on setting the R-key, see "Fax Settings," on p. 11-9.
7-5
Special Dialing
7