2
Specify the e-mail addresses ➞ press [Done].
Follow the procedure below to set the e-mail addresses for [Cc] and [Bcc].
• For instructions on specifying destinations not registered in the Address Book, see
"Specifying Destinations Using the New Address Tab," on p. 2-2.
• For instructions on specifying destinations stored in the Address Book, see "Using the
Address Book," on p. 2-28.
• For instructions on specifying destinations using the one-touch buttons, see "Using the
One-Touch Buttons," on p. 2-30.
• For instructions on specifying destinations and settings using the favorites buttons, see "Using
the Favorites Buttons," on p. 2-31.
• For instructions on specifying a destination by searching through the directory listings on a
server on the network using LDAP (Lightweight Directory Access Protocol), see "Using a
Server," on p. 2-32.
● To specify e-mail addresses for [Cc]:
❑
Press [Cc] ➞ specify the e-mail addresses.
● To specify e-mail addresses for [Bcc]:
❑
Press [Bcc] ➞ specify the e-mail addresses.
● To move e-mail addresses from [To] or [Bcc] to [Cc]:
❑
Press [From To/Bcc].
❑
Press [To] or [Bcc] ➞ select the desired e-mail addresses ➞ press [OK].
NOTE
[From To/Bcc] is displayed only if you pressed [Cc].
● To move e-mail addresses from [To] or [Cc] to [Bcc]:
❑
Press [From To/Cc].
❑
Press [To] or [Cc] ➞ select the desired e-mail addresses ➞ press [OK].
NOTE
[From To/Cc] is displayed only if you pressed [Bcc].
Setting Cc and Bcc Addresses
2
2-39