Ecm Reception - Canon CLC5151 Sending And Facsimile Manual

Hide thumbs Also See for CLC5151:

Table of Contents

ECM Reception

You can receive incoming documents using ECM (Error Correction Mode).

ECM is a mode which automatically corrects errors in an image while it is being received.

• If you want to communicate using ECM, it is necessary that ECM Reception be set in both the

destination machine and this machine. This function does not operate unless ECM is set in both

• Even when ECM is set, errors can sometimes occur due to a poor telephone line connection.

• If there is trouble with the line, it will take more time to receive the documents.

This mode is available only if the optional Super G3 FAX Board or is installed.

<Fax Settings> ➞ [ECM RX].

Select [On] or [Off] ➞ press [OK].

➞ [Communications Settings] ➞ [RX Settings] under

Irc4080i Clc4040 Irc4580i