● If you select [Store In Usr Inbox]:
● To erase a destination:
7
● If Access Number Management is set to 'On':
● If Access Number Management is set to 'Off':
10
10-26
Storing New Addresses
❑
Select the User Inbox from the Inbox Selection screen ➞ press [OK].
NOTE
Only one User Inbox can be stored in a group address.
❑
Select a destination from the group address ➞ press [Erase].
Finish storing the address.
❑
Press [Next].
❑
Press [Access Number].
❑
Press [Access Number] ➞ enter the access number using
❑
Press [Confirm] ➞ re-enter the access number for confirmation using
(numeric keys) ➞ press [OK]. ➞ [OK].
-
If you do not want to set an access number for this group address, press [OK] without
entering any number.
❑
Press [OK].
-
(numeric keys).