Canon CLC5151 Sending And Facsimile Manual page 70

1
2
2
2-8
Specifying Destinations Using the New Address Tab
Press [New Address] ➞ [I-Fax].
Press the Mode drop-down list ➞ select [Simple] or [Full].
Details of each item are shown below.
[Simple]: Sends scanned data as an image via the Internet.
[Full]: Sends scanned data as an image via the Internet, and enables you to receive a
delivery confirmation message telling you whether your I-fax was sent successfully.
NOTE
• In order for you to receive a confirmation message telling you the delivery status of your I-fax
document, the recipient's machine must have I-fax capabilities and be compatible with the Full
mode.
• If you send documents using the Full mode to a machine that does not support the Full mode,
delivery confirmation cannot be carried out. When this happens, the job concerned is not
considered as complete even though the actual sending of the document is successful. Such
jobs are displayed as <Waiting for result...> on the Status screen until the time set for <Full Mode
TX Timeout> in E-mail/I-Fax Settings in Communications Settings in System Settings (from the
Additional Functions screen) has lapsed. After the timeout, the job is moved to the log, and the
result is shown as <-> when sending of the document to a server or other destination could not
be verified.