Avaya G350 Administration page 73

Figure 1: Layer 1 T1 Port
Figure 2, E1/T1 Port Channel Group,
the Channel Group is encapsulated using frame relay protocol. The data is sent via a frame relay serial
interface and Sub-interfaces over the multiple IP interfaces defined using Data Link Connection
Identifier (DLCI).
Figure 2: E1/T1 Port Channel Group
Figure 3, USP Port - Frame Relay Protocol.,
is encapsulated using the frame relay protocol, and is sent via a frame relay serial interface and
sub-interfaces over the single IP interfaces defined using DLCI.
Figure 3: USP Port - Frame Relay Protocol.
Administration of the Avaya G350 Media Gateway
June 2004
on page 73 illustrates an E1/T1 port Channel Group. All data from
on page 73 illustrates a USP port. All data from the USP port
Configuring a WAN
Serial interface overview
73