Configuring a WAN
WAN configuration example
•
Configuration of a Policy list with the appropriate DSCP-CoS mappings:
G350-001# ip qos-list 401
G350-001(QoS 401)# name voice
Done!
G350-001(QoS 401)# dscp-table 34
G350-001(QoS 401/dscp 34)# operation fwd7
Done!
G350-001(QoS 401/dscp 34)# exit
G350-001(QoS 401)# dscp-table 46
G350-001(QoS 401/dscp 46)# operation fwd6
Done!
G350-001(QoS 401/dscp 46)# exit
G350-001(QoS 401)# trust-cos-dscp
Done!
G350-001(QoS 401)# exit
•
Activating the Policy List on the VLAN 1 interface:
G350-001# interface Vlan 1
G350-001(if:Vlan 1)# ip access-group 401 in
Done!
G350-001(if:Vlan 1)# exit
•
Serial interface configuration:
G350-001# interface Serial 5/1
G350-001(if:Serial 5/1)# ip address 2.2.2.1 24
G350-001(if:Serial 5/1)# mtu 300
NOTE:
Some LAN data applications do not support fragmented packets. In this case, do not
change the MTU from its default of 1500.
G350-001(if:Serial 5/1)# bandwidth 128
•
VoIP configuration:
G350-001(if:Serial 5/1)# fair-voip-queue
G350-001(if:Serial 5/1)# ip rtp header-compression
G350-001(if:Serial 5/1)# ip rtp compression-connections 20 (4)
G350-001(if:Serial 5/1)# ip rtp port-range 2048 3028
G350-001(if:Serial 5/1:1)# queue-limit 1 12
G350-001(if:Serial 5/1)# exit
•
Static routes configuration:
G350-001# ip default-gateway 2.2.2.2
G350-001# ip route 3.3.3.0 24 serial 5/1
G350-001# ip route 33.33.33.0 24 serial 5/1
* Description of footnoted commands (also applies to identical stages in configuring Site B):
(1) At this stage you apply Priority 7 to Voice Control traffic.
(2) At this stage you apply Priority 6 to RTP traffic.
(3) At this stage you apply maximum trust between 802.1p priority and DSCP.
88
(1)
(2)
(3)
Administration of the Avaya G350 Media Gateway
(5)
(6)
June 2004