16
Configuring the router
This chapter provides information about configuring the G350 router and contains the following sections:
•
Overview of the G350 router
instructions for enabling and disabling the router
•
Configuring interfaces
VLAN interfaces on the router
•
Configuring the routing table
•
Configuring GRE tunneling
•
Configuring DHCP and BOOTP relay
relays for routing on the G350
•
Configuring broadcast relay
G350
•
Configuring the ARP table
•
Enabling proxy ARP
•
Configuring ICMP errors
error messages
•
Configuring RIP
router
•
Configuring OSPF
router
•
Route redistribution
routing protocols
•
Configuring VRRP
redundancy of LAN routers and load balancing
•
Configuring fragmentation
on the G350 router
Overview of the G350 router
The Avaya G350 Media Gateway has an internal router. You can configure the following routing features
on the router:
•
Interfaces
•
Routing table
•
GRE tunneling
•
DHCP and BOOTP relay
•
Broadcast relay
•
ARP table
•
ICMP errors
Administration of the Avaya G350 Media Gateway
June 2004
— a list of features supported on the G350 router, along with
— instructions on how to configure Fast Ethernet, Loopback, Serial, and
— instructions on how to configure the routing table
— instructions on how to configure GRE tunnels on the router
— instructions on how to configure DHCP and BOOTP
— instructions on how to configure broadcast relay for routing on the
— instructions on how to configure the ARP table
— instructions on how to enable proxy ARP on an interface
— instructions on how to configure whether the router sends ICMP
— instructions on how to configure RIP parameters for each interface on the
— instructions on how to configure OSPF parameters for each interface on the
— instructions on how to configure route redistribution among multiple
— instructions on how to configure the VRRP protocol so as to support
— instructions on how to configure IP fragmentation and reassembly
Configuring the router
Overview of the G350 router
133