—
show ip next-hop-list
—
show ip next-hop-list <list number>
next hop list
—
show ip next-hop-list details
list of all next hops on each list and their current status
—
show ip next-hop-list details <list number>
next hop list, including all next hops on the list and their current status
•
In PBR list context:
—
show list
—
show list detailed
—
show rule
—
show rule <rule number>
—
show ip next-hop-list
—
show ip next-hop-list <list number>
next hop list
—
show ip next-hop-list details
list of all next hops on each list and their current status
—
show ip next-hop-list details <list number>
next hop list, including all next hops on the list and their current status
•
In next hop list context:
—
show next-hop
current status
Application example
The following example creates a policy-based routing scheme in which:
•
Voice traffic is routed over a serial interface. If the interface is down, the traffic is dropped.
•
Data traffic is routed over an Internet modem. If the modem connection is down, the traffic is
dropped.
The following commands create PBR list 801, named Voice.
ip pbr-list 801
name "Voice"
The following commands create, in PBR list 801, policy-based routing rules 1, 10, 20, 30, and 40. These
rules match packets with a source IP address between 6.0.0.0. and 6.255.255.255, or the DSCP value 34,
41, 43, 44, or 46, and route these packets in accordance with next hop list 1.
ip-rule 1
next-hop list 1
source-ip 6.0.0.0. 0.255.255.255
dscp 34
exit
Administration of the Avaya G350 Media Gateway
June 2004
— displays the number and name of all next hop lists
— displays the parameters of all next hop lists, including a
— displays the list number and name of the current PBR list
— displays all the parameters of the current PBR list
— displays a list of all rules configured for the current list
— displays the parameters of the specified rule
— displays the number and name of all next hop lists
— displays the parameters of all next hop lists, including a
— displays the next hop entries in the current next hop list and their
Configuring policy-based routing
— displays the number and name of the specified
— displays the parameters of the specified
— displays the number and name of the specified
— displays the parameters of the specified
Application example
183