Avaya G350 Administration page 270

Configuring the G350 using the Avaya IW
Trunk configuration
39
You can perform the following actions in the IP Trunk List screen:
•
Adding a trunk
•
Modifying trunk parameters
•
Modifying IP route configuration
•
Displaying trunk status
•
Removing a trunk
To proceed to the CO Trunk List screen for configuring a trunk media module, click
See Configuring a trunk media module
Adding a trunk
40
To add a new trunk click
41
Enter the required information in the IP Trunk Configuration screen and click
Trunk List appears, with the new trunk included in the list of trunks. To add an additional trunk,
click
Add IP Trunk
select an action from the
Modifying trunk parameters
42
To modify the trunk's parameters, click the configuration icon in the
Trunk List screen.
270
on page 274.
. The IP Trunk Configuration screen appears.
Add IP Trunk
and repeat this step. When you are finished adding trunks, click
column to modify an existing trunk.
Actions
Administration of the Avaya G350 Media Gateway
.
Continue
. The IP
Continue
or
Continue
column of the IP
Actions
June 2004