Configuring Dynamic Trap Manager; Snmp Configuration Examples - Avaya G350 Administration

Configuring SNMP

Configuring dynamic trap manager

•
Use the
this command to delete an SNMPv3 view.
•
Use the
•
Use the
to which they are mapped.
•
Use the
•
Use the
•
Use the
•
Use the
trap receivers.
Configuring dynamic trap manager
Dynamic trap manager is a special feature that ensures that the G350 sends traps directly to the currently
active MGC. If the MGC fails, dynamic trap manager ensures that traps are sent to the backup MGC.
Use the
snmp server dynamic-trap-manager
manager feature. You can configure the following parameters:
•
— Determines whether to send traps or informs to the recipient. The default is traps.
type
•
version
must add the v1 community string to use in notifications. The default is v3.
•
udp port
use.
•
notification type
all. For a list of possible notification types, see
NOTE:
There is no default value for the
in order for the dynamic trap manager to send traps.
The following example configures dynamic trap manager to send all traps:
G350-001(super)# snmp-server dynamic-trap-manager traps v1 public
udp-port 162 all

SNMP configuration examples

This section provides SNMP configuration examples:
The following example enables link up/down traps on an Ethernet interface:
G350-001(super)# interface FastEthernet 10/2
G350-001(super-if:FastEthernet 10/2)# snmp trap link-status
Done!
104
command to add or exclude OIDs from a view. Use the
snmp-server view
command to display a list of SNMPv3 views.
show snmp view
show snmp userToGroup
command to display the SNMPv3 engine ID.
show snmp engineID
command to display a list of SNMPv3 groups.
show snmp group
command to display a list of SNMPv3 users.
show snmp user
command to display a list of SNMPv3 notification receivers and SNMPv1
show snmp
— Determines the SNMP security model (v1, v2c, v3). If the security model is v1, you
— Optional. A keyword and variable that specify which UDP port of the target host to
— The type of traps to be sent. To send all types of traps, set this parameter to
command to display a table of SNMPv3 users and the groups
command to specify the parameters of the dynamic trap
Configuring SNMP traps
notification type parameter. Thus, you must enter a value
Administration of the Avaya G350 Media Gateway
form of
no
on page 102.
June 2004