set port redundancy
Use the set port redundancy command to globally enable or disable port redundancy on
the device. Using this command does not delete existing redundancy entries.
Note:
This command is not supported by the G250.
Note:
Syntax
set port redundancy {enable|disable}
Parameters
Parameter
enable
disable
User level
read-write
Context
general
Example
To enable port redundancy:
G350-147# set port redundancy enable
All redundancy schemes are now enabled
Related commands
set port redundancy
Description
Enable port redundancy on the device
Disable port redundancy on the device
on|off,
set port
redundancy-intervals,
Alphabetical listing of CLI commands
Possible
Values
show port redundancy
Issue 1.1 June 2005
Default
Value
457