Removing Computers Paired Using Avaya Screen Link; Enabling The Avaya Cu360 Advanced Settings - Avaya CU360 Manual

Configuring Avaya CU360
• To automatically pair a device, click Screen Link > Search for Endpoints.
If you automatically pair a device, Avaya Equinox
2. Do one of the following:
• To manually pair a device, enter the IP address of the device.
• To automatically pair a device, select a device.
If required, Avaya Equinox
3. (Optional) Enter PIN.
Avaya CU360 displays PIN to enter on the screen.
4. Click OK.
Result
Avaya CU360 displays the shared content on the screen. The endpoint also displays alerts for
incoming calls.

Removing computers paired using Avaya Screen Link

About this task
Computers connected to Avaya CU360 using Avaya Screen Link remain paired until users shut
down the computer or end the connection from the computer. You can manually remove
computers paired with Avaya CU360.
Procedure
1. Do one of the following:
• On the endpoint, click
meetings.
• On the web interface, click More Actions.
2. Click Unpair Screen Link.
Result
Avaya CU360 removes the computer paired using Avaya Screen Link.

Enabling the Avaya CU360 advanced settings

Procedure
1. Click Configure > General.
Avaya CU360 displays the General settings window.
July 2020
®
prompts you to enter PIN.
> Meeting options. You can use this option only during
Using Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
®
displays the list of detected devices.
36