Figure 1-12. Reagent trays
RGT Pause button
Use the RGT Pause button to temporarily stop testing, on the analyzer or from a lab
automation system, so that reagents can be added or removed at the reagent trays.
WARNING
To avoid injury, heed all pause status messages. Selecting a pause button does not elicit an
immediate response. An automated quality check or any deviation from approved
procedures may override a pause. Failure to monitor operating mode messages and avoid
moving parts may result in injury.
NOTES
•
The text on the RGT Pause button is gray when inactive and black when active. After
the button is selected, the RGT Pause process can take some time. The system will
safely complete any tests on samples that have been aspirated.
•
For more information on using the RGT Pause button, refer to the Online Operator's
Guide.
Reagent pumps
Figure 1-13. Reagent pumps
System Overview
1
Reagent Tray 1 (RTT1)
2
Reagent Tray 2 (RTT2)
1
Sampling and reagent wash pump
(SRWP)
2
Reagent pump 1 (RP1)
3
Reagent pump 2 (RP2)
21