2 Operating the System
Start the System
NOTE:
Instruction section on page 99.
Logging on
There are 4 access levels to the system software:
Level
user
supervisor
tech_manager yes
service
You are automatically logged on at the user level during startup. No operator is required.
If you log on at the supervisor or tech_manager levels, when done, you should log on to
the user level (no password required).
Starting the system
BIOHAZARD
WARNINGS
CAUTIONS
System Overview
Before you start operating the system, please read the Additional Operating
Password
no
yes
yes
Before you turn on the system, verify that waste drain is not clogged. Clogging of
the drain could result in a potential biohazard.
• Keep all covers and safety shields in place during system operation to avoid
injury or infection.
• When starting up the system, be sure to follow all instructions correctly to avoid
loss of data.
• Do not use excessive force when opening and closing covers to avoid damage to
the hinges.
• Make sure that all probes and washers are free to move without any obstruction
to avoid damage to the analyzer.
Comment
Intended for routine operation
Access to some system setup and advanced
maintenance features
Access to most system setup and advanced
maintenance features
You have to contact your technical service
provider or distributor in order to change the
default settings on these windows.
Access for Siemens service personnel
71