Operation Panel
This window opens after you start the system software from the Startup window.
Use this window for the following tasks:
•
perform routine tasks on the Chemistry system
•
check the system status and alarm messages
Buttons
You select buttons on the Operation Panel to perform routine tasks.
Status and message boxes
The boxes on the right of the Operation Panel provide information on current system
conditions.
1
Operating modes
2
Load status indicator
Other tasks accessed from System(s) on the Operation Panel
Use the System(s) list to perform these tasks. To open the menu, select
top left of the panel.
System Overview
Start
RGT
Pause
Stop
SMP
Pause
Wash
Prime
Error log
3
Alarm message box
4
Time remaining indicator
5
Siemens Remote Services
(SRS) indicator
Initialize
Host On/Off
Operator's
Audible
Guide
Alarm
at the
System(s)
39