Performing A System-Assisted Startup (Start Set) - Siemens ADVIA 1800 Operator's Manual

1. After the power is applied and the Windows operating system is loaded, the ADVIA
Chemistry system Startup window displays.
2. Turn on the optional universal rack handler:
• For the rack handler, set the control panel Standby/On switch to | (ON).
• For the universal rack handler, set the display panel Ready/Standby switch to
READY.
3. At the analyzer power panel, set the Operate/Standby switch (
Figure 2-1. Power panel at Startup
The power indicator (
when the communication to the PC is established.
4. At the Startup window, do the following:
a. In the Please enter password box, enter the user password.
b. Select New Start or Re-start, then select
5. When the Start and the Ready indicators are off, and the Initialize button on the
Operation Panel activates (turns black), select
6. At the Windows desktop, double-select the rack handler icon.
7. Log on as

Performing a system-assisted startup (Start set)

1. Verify that sufficient system reagents and wash solutions are available for the startup
you want to run.
2. At the Menu Panel, select
72
The ready indicator is green.
The power indicator is green.
) is on, and the Start (
2
User passwords assigned in the User Code Settings window are not case sensitive.
After a few minutes, the Menu Panel and the Operation Panel open.
or
supervisor tech_manager
Maint
) and Ready (
4 5
.
OK
Initialize .
, if required.
. then select
System Startup/Shutdown Settings
ADVIA 1800 Operator's Guide
) to .
1 Operate
) indicators start flashing
.