As Required Maintenance; Backing Up System Files - Siemens ADVIA 1800 Operator's Manual

As required maintenance

Backing up system files

The system software consists of the operating system, data processing software, and user-
specific system and data files. Back up the system files to a USB Memory Stick or a
formatted CD/CD-RW/DVD disc on a regular basis or whenever you make any
configuration or parameter changes. The Restoring System Files procedure follows this
procedure.
Materials required:
USB memory stick, CD-RW disc or DVD-RW disc
Time: 10 minutes
Analyzer mode: READY
NOTE:
up files to a DVD, refer to the online Operator's Guide.
1. Use an indelible marker to write
label.
2. If the disc is not formatted, format the disk as follows:
a. Close the ADVIA software, then at the main Startup window, select
b. Insert the labeled disk into the CD/DVD drive.
c. At the Windows taskbar, right-select
d. In the left pane of the Explorer window, locate and right-select the CD/DVD
e. Select
f. On the Drag-to-Disc Format Options window, select
g. Select
h. On the Drag-to-Disc Format Options window, select
i.
3. Restart the ADVIA software.
a. At the Windows desktop, select
b. Select
4. At the Startup window, select
5. At the ADVIA Backup window, select
6. Select the Target Files to be backed up from the following options:
•
•
158
A CD or a memory stick is easier to use than a DVD for this procedure. To back
drive (E: or X:).
.
Format
OK.
Acknowledge any prompts related to formatting.
, then select Startup and choose
Programs
System Files - Approximately 30 MB of disk space is required.
- Disk space required is dependent on the amount of data stored on the
Data Files
C:/ drive. A new CD holds approximately 650 MB.
with the current date on a disc
System back up
Start , then select
.
Start
HRSTART
.
Back-up
Make a Backup Copy
Cancel
Explore .
.
Full Format
.
Yes
.
.
ADVIA 1800 Operator's Guide
.