Smp Pause - Siemens ADVIA 1800 Operator's Manual

Figure 1-14. Sample tray

SMP Pause

Use the SMP Pause button at the Operation Panel or on the analyzer to temporarily stop
sampling so you can add samples to or replace the STT/CTT tray.
Figure 1-15. Sample tray rotation and sample pause buttons
WARNING
To avoid injury, heed all pause status messages. Selecting a pause button does not elicit an
immediate response. An automated quality check or any deviation from approved
procedures may override a pause. Failure to monitor operating mode messages and avoid
moving parts may result in injury.
NOTES
•
The text on the SMP Pause button located on the Operation Panel is gray when
inactive and black when active. When the button is gray on the Operation Panel, the
button on the analyzer is also inactive.
•
To use the sample pause function when the system is running samples from a lab
automation system, use the SMP Pause button on the analyzer.
•
For more information on using the RGT Pause button, refer to the Online Operator's
Guide.
System Overview
1 Sample Barcode Reader
2 Sample Tray (STT)
3 Sample Tray (CTT)
1 STT Rotation Button
2 STT Rotation LED
3 SMP Pause Button
23