Sample Test Status Color Codes - Siemens ADVIA 1800 Operator's Manual

Sample test status color codes

The Test Result Monitor window uses seven color codes to represent sample status,
and the seven codes are displayed on the window. The Review/Edit window uses
these seven plus an eighth to indicate that a test for the sample was ordered but not
completed. Discrepancies in color are due to the windows' displaying different
information. For example, a "complete" sample appears as dark blue on the Test
Result Monitor window, indicating that sampling is complete, while in the Review/
Edit window the same sample appears as pale blue, indicating that some tests are
missing.
The position number does not contain a sample for this run
The run began and a workorder was created for this sample, but the sample was not
yet aspirated from the sample tray.
At the Test Result Monitor window – the sample was aspirated from the sample tray
and was added to the dilution tray.
At the Review/Edit window – the sample is being analyzed or is being rerun.
At the Test Result Monitor window – the sample has been aspirated
At the Review/Edit window – analysis or the rerun for the sample is complete, and
the resultant data is produced.
The sample was analyzed but it must be reanalyzed. The reanalysis has not yet
started.
The sample is in the process of being reanalyzed.
The requested rerun for this sample is complete and the resultant data is produced.
System Overview
No sample (white)
Untested (gray)
In process (pink)
Complete (blue)
Pending run (yellow)
Being rerun (pink)
Rerun completed (green)
43