Restoring System Files - Siemens ADVIA 1800 Operator's Manual

7. Verify that the backup name is the current date.
NOTE:
format. Accept the destination folder default for the DVD disk drive letter (usually
D:) or select to
available, then the backup can be stored on the partitioned storage drive (D:).
8. Select
9. At the Backup window, select
NOTE:
10. When the file copy completes, at the Backup window, select

Restoring system files

1. Insert the CD or the DVD containing the backup files into the CD drive.
NOTES
• When restoring backed-up data files (in the Data subfolder under the A002 folder),
select the
deletes any current data files on the PC hard drive before the backed up system
and data files are restored.
• If the current data files are needed, perform a backup before restoring previous
files. The restore feature restores all files (system and/or data files) that were
previously backed up. If this is the case, close the ADVIA Backup window and
perform Backing up system files (see above).
2. At the Startup window, select
3. At the ADVIA Backup window, select
source folder that contains the backup files to restore and select
4. At the Restore confirmation window, select
If the disk contains all the backed up files required for the restore procedure, the copy
function begins.
5. If the backed up files are on more than one disk, select
6. At the ADVIA Backup window, select
7. At the ADVIA Backup window, select
8. Reboot the PC.
Maintenance
The system names the backup automatically, which consists of a yyyymmdd
choose a different destination. If a recordable disk is not
Browse
Execute .
If an error window displays, reformat the disk and try again.
Delete Data Files
Back-up
to confirm the copy.
OK
checkbox at the ADVIA Backup window. This
.
Restore a Backup Copy
OK .
, select
Exit Restore
.
Cancel
OK .
, then browse to the
.
Execute
.
Continue
, then select .
OK
159