How To Change Adjustment Values Or Modes - Ricoh Aficio FT4027 Operating Instructions Manual

How To Change Adjustment Values Or Modes

S
The following user tools cannot be adjusted by following the procedures below.
• For No. 1,
• For No. 16,
• For No. 23,
• For No. 24,
• For No. 25,
• For No. 26,
1 .
Access the user tool you want to
adjust. (
number of the user tool you se-
lect will blink in the copy counter.
2 .
The default setting will blink in the
Three Digit indicator. Enter the
required setting using the Num-
ber keys.
5
For the settings, refer to pages 121
to 138.
5
If you input a wrong number, press
the Clear/Stop key. Then, enter the
correct number
3 .
Press the Recall/Enter key to
store the required setting.
5
Both the user tool's number and set-
ting will continue blinking even if you
press the Recall/Enter key. How-
ever, they are stored.
5
If you would like to adjust another
user tool, press the Clear Modes/
Energy Saver key. Then, enter the
user tool's number.
see page 113.
see page 128.
see page 132.
see page 134.
see page 136.
see page 137.
See page 118.) The
Max
0
R/#
USER TOOLS
%
mm
119