Config: Ip  Ant (Advanced Network Timing); Config: Ip  Ant  Sntp (Simple Network Time Protocol) - Comtech EF Data CDM-625A Installation And Operation Manual

Advanced satellite modem (18 kbps – 25 mbps)

Hide thumbs Also See for CDM-625A:

Table of Contents

CDM-625A Advanced Satellite Modem

Front Panel Operation

CONFIG: IP  ANT (Advanced Network Timing)

IP Protocols:

arrow keys to select SNTP or PTP. Press ENTER.

6.2.1.13.4.1 CONFIG: IP  ANT  SNTP (Simple Network Time Protocol)

SNTP: Disabled

Servers: Primary Backup

You may use Simple Network Time Protocol (SNTP) to synchronize computer clocks throughout

a computer network when the ultimate performance of the full NTP implementation (as per

RFC-1305 (Requests for Comment No. 1305: Network Time Protocol, Version 3, Specification,

Implementation and Analysis)) is not needed or justified.

arrow keys to navigate between the top line or bottom line operands as needed.

On the top line, use the

For SNTP – Use the

When Enabled, SNTP contacts the time server to update the Real-Time Clock (RTC) every

When Disabled, no such notifications take place.

For Time Zone – Use the

On the bottom line, use the

Press ENTER to continue.

Where "###### Time Server" denotes "Primary Time Server" or "Backup Time Server":

####### Time Server: 192.168.001.010

Last Update: Never

arrow keys to select SNTP or Time Zone:

arrow keys to select SNTP as Enabled or Disabled.

arrow keys to set your desired time zone:

arrow keys to select the Primary or Backup Server submenu.

Time Zone=GMT

Chapters

Table of Contents