Odu Operations Using The Telnet Cli - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
CDM-625A ODU (Transceiver, BUC, LNB) Operation
10.5.1

ODU Operations using the Telnet CLI

1) ODU Comms must be Enabled, and the CDM-625A must be configured for
2) The Comtech EF Data KST-2000A/B Transceiver and LPOD Amplifier / Block Up
10.5.1.1 Home (Main) Menu
The Home Menu serves as the CLI's primary navigation page. Press the 'E' hot key to access the
ODU submenus.
Hot Key Description
A Administration
B
Modem
C Network
D WAN
E Outdoor Unit (ODU)
F Redundancy
G
General Information
H
Logs
I Statistics
J Contact
K
Remote Mode
70/140 MHz operation in order to fully use the Telnet CLI ODU menus.
Converter are not supported by the Telnet CLI at this time.
Function
Access administrative configuration submenu
Access modem configuration submenu
Access network configuration submenu
Access WAN configuration submenu
Access ODU comms, CSAT-5060 configuration submenus
Access 1:1 or 1:N redundancy configuration submenu
Enter alphanumeric Circuit ID; view read-only CDM-625A operations
information screens
Access Base Modem and Packet Processor stored events and statistics logs,
alarms control submenus
Access CDM-625A operational statistics submenus
View read-only Customer Support contact information screen
Open the Remote Access Mode setting
10–53
MN-CDM625A
Revision 4