Radius List Of Supported Rfcs (Requests For Comment - Comtech EF Data CDM-625A Installation And Operation Manual

Appendix T. CDM-625A RADIUS
T.1 Overview
Ethernet-based remote monitor and control (M&C) of the CDM-625A Advanced Satellite
Modem is available through the CDM-625A HTTP (Web Server) Interface, SNMP, and through
the issuance of remote commands and queries via Telnet.
For CDM-625A Advanced Satellite Modems that are equipped with the Optional IP Packet
Processor, additional remote M&C access is available via the Telnet Command Line Interface
(CLI).
RADIUS is the acronym for Remote Authentication Dial In User Service. This is a networking
protocol that provides centralized access authentication, authorization, and management for
CDM-625A Advanced Satellite Modems.
T.1.1

RADIUS List of Supported RFCs (Requests for Comment)

RFC No. Description
"Remote Authentication Dial In User Service (RADIUS)"
2865
Rigby, C., Willens, S., Rubens, A., Simpson, W., June 2000
"PPP Authentication Protocols"
1334
Llloyd, B., Simpson, W.,October 1992
"PPP Challenge Handshake Authentication Protocol (CHAP)"
1994
Simpson, W., August 1996
"Microsoft PPP CHAP Extensions, Version 2"
2759
Zorn, G., January 2000
"Microsoft Vendor-specific RADIUS Attributes"
2548
Zorn, G., March 1999
T–1
CLIENT