Fast Activation Procedure; Fast Activation Using The Cdm-625A Front Panel - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem

FAST Activation Procedure

5.2 FAST Activation Procedure

5.2.1 FAST Activation Using the CDM-625A Front Panel

See Chapter 6. FRONT PANEL OPERATION for complete information about using this
interface.
1) Before you contact Comtech EF Data Product Support to order FAST feature upgrades, you
must retrieve the modem's motherboard serial number:
A. From the front panel main menu, SELECT: FAST, and then press ENTER.
SELECT: Configuration
Info
B. The modem's 9-digit "Baseboard S/N" is displayed on the bottom line, to the left, as
shown in this example:
FAST:
Baseboard S/N 123456789
C. Write down the Serial Number: ______________________________________
2) View the currently installed FAST features:
A. From the front panel main menu (shown in Step 1A), use the
the FAST menu branch, and then press ENTER. Then, use the
Options (shown in Step 1B). Press ENTER once more.
B. From the SELECT: FAST  OPTIONS submenu:
FAST options:
Set Register1
Use the
C. Use the ▲▼arrow keys to scroll through the list of available FAST options. Options are
identified as "
FAST: View options: 01
Any option identified as "
Store/Ld Utility
Options
View Options
Set Register2
◄ ►
arrow keys to select View Options, and then press ENTER.
Installed Not Installed
" or "
Base 5 Mbps data rate installed
Not Installed
Test Monitor
ODU FAST
Demo-Mode CnC
HW Rev1.X Audio
" as shown in this example:
" may be purchased as a FAST upgrade.
5–2
MN-CDM625A
Revision 4
()
◄ ► arrow keys to select
◄ ►
arrow keys to select
()
()