Keypad - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Front Panel Operation
LED
ODU FAULT Flashing
UNIT
STATUS
STORED
EVENT
REMOTE
TEST MODE
ONLINE

6.1.2 Keypad

The keypad functions as follows:
Key
ENTER
CLEAR
◄ ►
(Left, Right)
▲▼
(Up, Down)
State Function
Red BUC or LNB or CSAT or KST fault detected
Communication fault with BUC or CSAT or KST
Off BUC or LNB or CSAT or KST no fault detected
Green
No Unit Faults or Traffic Faults
Orange No Unit Faults, but a Traffic Fault exists
Red A Unit Fault exists (Example: PSU fault)
There is a Stored Event in the log, which can be viewed from the front panel, or
Orange
retrieved via the remote control interface
Off
There are no Stored Events
Orange
The Unit is in Remote Mode – local monitoring is possible, but no local control
Off
The Unit is in Local Mode – remote monitoring is possible, but no remote control
Orange A Test Mode is selected (Example: IF Loopback)
Off There is no Test Mode currently selected
Green The Unit is Online and carrying traffic
The Unit is Offline (Standby) – forced by externally connected 1:1 or 1:N redundancy
Off
system
The keypad has an auto-repeat feature. When you hold
down a key for more than one second, the key action
repeats, automatically, at the rate of 15 keystrokes per
second. This is particularly useful when editing numeric
field with many digits, such as frequency or data rate.
Description
Use this key to display the nested menu for a selected function, or to execute (save) a
configuration change.
Use this key to back out of a selection or to cancel a configuration change that has not been
executed using ENTER. Press CLEAR to return to the previous menu screen.
Use these keys to navigate between available selections, or to move the cursor position, on any
menu screen.
Use these keys primarily to change the alphanumeric selection (i.e., numbers for configuration
data, letters for text strings) at the current cursor position, or to scroll through pre-defined
parameter settings that may be provided at the current cursor position.
6–3
MN-CDM625A
Revision 4