Config: Ip - Comtech EF Data CDM-740 Installation And Operation Manual

CDM-740 Advanced Satellite Modem
Front Panel Operation
5.4.5.1 (CONFIG:) IP
GE1: Addr/Range
Link-Config
GE2: Addr/Range
Link-Config
MANAGEMENT: Addr/Range
Link-Config
Select Addr/Range, MAC, Gateway, Link-Config, or NegoSpeed using the ◄ ► arrow keys,
then press ENTER.
(CONFIG:) IP
[HEADER] Ethernet IP Address/Range:
192.168.001.002/24
Where [HEADER] is GE1, GE2, or MANAGEMENT: To configure the IP Address for the
Ethernet M&C port for this interface, use the ◄ ► arrow keys to select the character to edit, then
the arrow keys to edit the value of that digit. Press ENTER when done.
▲ ▼
(CONFIG:) IP
[HEADER] Ethernet MAC Address (Read-Only)
00-06-B0-00-01-06
Where [HEADER] is GE1, GE2, or MANAGEMENT: This is a 'status only' display showing the
interface MAC address. Exit this read-only screen by pressing ENTER or CLEAR.
(CONFIG:) IP
[HEADER] Ethernet IP Gateway:
192.168.001.002
Where [HEADER] is GE1, GE2, or MANAGEMENT: To edit the IP Gateway Address for the
Ethernet M&C port for this interface, use the ◄ ► arrow keys to select the character to edit, then
use the arrow keys to edit the value of that digit. Press ENTER when done.
▲ ▼
(CONFIG:) IP
[HEADER] Link Configuration:
Auto 1000F 100F 100H 10F 10H
Where [HEADER] is GE1, GE2, or MANAGEMENT: To configure the line speed and duplex
setting for this interface, use the ◄ ► arrow keys to select the configuration setting, then press
ENTER.
(GE1 / GE2 / MGMT)
MAC
NegoSpeed
MAC
NegoSpeed
NegoSpeed
(GE1 / GE2 / MGMT)
(GE1 / GE2 / MGMT)
(GE1 / GE2 / MGMT)
(GE1 / GE2 / MGMT)
5–16
Gateway
Gateway
MAC Gateway
Addr/Range
MAC
Gateway
Link-Config
Revision 0
MN-CDM740
◄►
( )
◄►
( )
◄►
( )
◄►
( E)
◄►
( E)
◄►
( E)
◄►
( E)