Configuration | Ant | Sntp (Simple Network Timing Protocol) - Comtech EF Data CDM-625A Installation And Operation Manual

Advanced satellite modem (18 kbps – 25 mbps)

Hide thumbs Also See for CDM-625A:

Table of Contents

CDM-625A Advanced Satellite Modem

Ethernet-based Remote Product Management

7.5.4.3.11.2 Configuration | ANT | SNTP (Simple Network Timing Protocol)

Sect. K.7.1 Simple Network Timing Protocol (SNTP) (Appendix K. ETHERNET NETWORK

CONFIGURATION)

Simple Network Time Protocol (SNTP) is used to synchronize computer clocks throughout a

computer network when the ultimate performance of the full NTP implementation as per

RFC-1305 (Requests for Comment No. 1305: Network Time Protocol, Version 3, Specification,

Implementation and Analysis) is not needed or justified.

Feature – Use the drop-down list to select SNTP operation as Disabled or Enabled.

Time Zone – Use the drop-down list to select your desired time zone. Available selections

Primary / Backup Ethernet Time Server – Enter the desired Time Server's IP Address in the

form XXX.XXX.XXX.XXX.

Last Update – This read-only field displays the time and date that the selected server was

last updated. The time in shown military format (HH:MM:SS); the date is shown in DAY-

MONTH-YEAR format in accordance with European convention. This line specifies "Never" if

no update information exists.

Figure 7-32. Configuration | ANT | SNTP page

Table of Contents