Table of Contents
Advertisement
CDM-625A Advanced Satellite Modem
Ethernet-based Remote Product Management
The CDM-625A HTTP Interface menu tree diagram (Figure 7-2) indicates those primary and
nested IP Packet Processor pages having conditional access and operation with an asterisk (*).
Further, each interface page subsection (under Sect. 7.5.4 Web Server Page Descriptions)
governed by such restrictions contains an advisory note similar to this example:
These pages are accessible only to Admin users and when you install and enable the
optional IP Packet Processor card. See Sect. 7.5.3.1 for complete details about using
these conditional access pages.
7.5.4 Web Server Page Descriptions
Access to and availability of certain CDM-625A HTTP Interface pages are dependent
upon the options purchased for operation (e.g., the IP Packet Processor card) as well
as the detected presence of auxiliary equipment (e.g., Block Up Converters, Low
Noise Block Down Converters, Redundancy Switches, etc.), as installed and
configured for use with the CDM-625A. Any such operational restrictions are noted
in the subsections that follow through the remainder of this chapter.
7.5.4.1
Home Page
Use this page to identify the product and its current operating firmware version. Click the Home
navigation tab and/or the nested page tab to return to this page from anywhere in the HTTP
Interface.
Figure 7-3. CDM-625A Satellite Modem Home page
7–13
MN-CDM625A
Revision 4
Advertisement
Chapters
Table of Contents
