Alcatel-Lucent 7210 SAS M Configuration Manual page 83

router
Syntax router router-instance
Context monitor
Description This command enables the context to configure criteria to monitor statistical information for BGP,
LDP, MPLS, OSPF and RSVP protocols.
Parameters
router-instance — Specify the router name or service ID.
service
Syntax service
Context monitor
Description
This command enables the context to configure criteria to monitor specific service SAP criteria.
id
Syntax id service-id
Context monitor>service
Description This command displays statistics for a specific service, specified by the service-id, at the configured
interval until the configured count is reached.
The first screen displays the current statistics related to the service-id. The subsequent statistical
information listed for each interval is displayed as a delta to the previous display. When the keyword
rate is specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters service-id — The unique service identification number which identifies the service in the service
sap
Syntax sap sap-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>service>id service-id
Description This command monitors statistics for a SAP associated with this service.
7210 SAS M, T, X, R6 Basic System Configuration Guide
Values router-name:
service-id:
Default Base
domain.
Base, management
1 — 2147483647
Root Commands
Page 83