Alcatel-Lucent 7210 SAS M Configuration Manual page 345

Service access switch
Hide thumbs Also See for Alcatel-Lucent 7210 SAS M:
Table of Contents

Advertisement

Default
no allow-imm-family
Parameters
imm-family — The type of IMM family type to be used in a chassis, that is configured up-front.
clli-code
Syntax
clli-code clli-code
no clli-code
Context
config>system
Description
This command creates a Common Language Location Identifier (CLLI) code string for the router. A
CLLI code is an 11-character standardized geographic identifier that uniquely identifies geographic
locations and certain functional categories of equipment unique to the telecommunications industry.
No CLLI validity checks other than truncating or padding the string to eleven characters are
performed.
Only one CLLI code can be configured, if multiple CLLI codes are configured the last one entered
overwrites the previous entry.
The no form of the command removes the CLLI code.
Default
none — No CLLI codes are configured.
Parameters
clli-code — The 11 character string CLLI code. Any printable, seven bit ASCII characters can be
config-backup
Syntax
config-backup count
no config-backup
Context
config>system
Description
This command configures the maximum number of backup versions maintained for configuration
files and BOF.
For example, assume the config-backup count is set to 5 and the configuration file is called xyz.cfg.
When a save command is executed, the file xyz.cfg is saved with a .1 extension. Each subsequent
config-backup command increments the numeric extension until the maximum count is reached.
7210 SAS M, T, X, R6 Basic System Configuration Guide
• A change in the current value of IMM family requires a reboot of the node to take effect. there-
fore, the user configured value for IMM family type takes effect only after the next reboot.
Values
imm-sas-r | imm-sas-r-b
used within the string. If the string contains special characters (#, $, spaces, etc.), the entire string
must be enclosed within double quotes. If more than 11 characters are entered, the string is
truncated. If less than 11 characters are entered the string is padded with spaces.
xyz.cfg
xyz.cfg.1
xyz.cfg.2
System Management
Page 345

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alcatel-lucent 7210 sas tAlcatel-lucent 7210 sas r6 osAlcatel-lucent 7210 sas x

Table of Contents