Alcatel-Lucent 7210 SAS M Configuration Manual page 105

Configuration Commands
File System Commands
shutdown
Syntax
Context
Description
Default
Parameters
7210 SAS M, T, X, R6 Basic System Configuration Guide
[no] shutdown [cflash-id]
file
This command is available for use only with removable storage drives. The removable storage drives
differ among the 7210 SAS platforms. It cannot be used with the internal non-removable compact
flash. See the values below to know list of removable flash devices per 7210 SAS platform.
Use the no shutdown [cflash-id] command to enable the drive.
no shutdown — compact flash device administratively enabled.
cflash-id — Enter the device identifier (see the values below for each platform) to be shut down or
enabled. When a specific cflash-id is specified, then that drive is shutdown.
Default
None
Values uf1: - 7210 SAS-M
cf2: | uf1: - 7210 SAS-T
cf2: | cf2-A: | cf2-B: | uf1: | uf1-A: | uf1-B: - 7210 SAS-R6
uf1: - 7210 SAS-X
Configuration Commands
Page 105