Alcatel-Lucent 7210 SAS M Configuration Manual page 365

Service access switch
Hide thumbs Also See for Alcatel-Lucent 7210 SAS M:
Table of Contents

Advertisement

The TiMOS logger message includes a rising or falling threshold crossing event indicator, the sample
type (absolute or delta), the sampled value, the threshold value, the RMON-alarm-id, the associated
RMON-event-id and the sampled SNMP object identifier.
Use the no form of this command to remove an rmon-event-id from the configuration.
Parameters
rmon-event-type — The rmon-event-type specifies the type of notification action to be taken when
description — The description is a user configurable string that can be used to identify the purpose
owner owner — The owner identifies the creator of this alarm. It defaults to "TiMOS CLI". This
Configuration example:
7210 SAS M, T, X, R6 Basic System Configuration Guide
this event occurs.
Values
log — In the case of log, an entry is made in the RMON-MIB log table for each
event occurrence.
This does not create a TiMOS logger entry. The RMON-MIB log table entries can
be viewed using the show>system>thresholds CLI command.
trap — In the case of trap, a TiMOS logger event is generated. The TiMOS logger
utility then distributes the notification of this event to its configured log
destinations which may be CONSOLE, telnet session , memory log, cflash file,
syslog, or SNMP trap destinations logs.
both — In the case of both, both a entry in the RMON-MIB logTable and a TiMOS
logger event are generated.
none — In the case of none, no action is taken.
Default
both
of this event. This is an optional parameter and can be 80 characters long. If the string contains
special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
Default
An empty string.
parameter is defined primarily to allow entries that have been created in the RMON-MIB
alarmTable by remote SNMP managers to be saved and reloaded in a CLI configuration file. The
owner will not normally be configured by CLI users and can be a maximum of 80 characters
long.
Default
TiMOS CLI
Default
event 5 rmon-event-type both description "alarm testing" owner "TiMOS CLI"
System Management
Page 365

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alcatel-lucent 7210 sas tAlcatel-lucent 7210 sas r6 osAlcatel-lucent 7210 sas x

Table of Contents