Alcatel-Lucent 7210 SAS M Configuration Manual page 416

System Administration Commands
Syntax debug-save file-url
Context admin
Description
This command saves existing debug configuration. Debug configurations are not preserved in
configuration saves.
Default none
Parameters
file-url — The file URL location to save the debug configuration.
disconnect
Syntax disconnect {address ip-address | username user-name | console | telnet | ftp | ssh}
Context admin
Description This command disconnects a user from a console, Telnet, FTP, or SSH session.
If any of the console, Telnet, FTP, or SSH options are specified, then only the respective console,
Telnet, FTP, or SSH sessions are affected.
If no console, Telnet, FTP, or SSH options are specified, then all sessions from the IP address or from
the specified user are disconnected.
Any task that the user is executing is terminated. FTP files accessed by the user will not be removed.
A major severity security log event is created specifying what was terminated and by whom.
Default
none — No disconnect options are configured.
Parameters
address ip-address — The IP address to disconnect, specified in dotted decimal notation.
username user-name — The name of the user.
console — Disconnects the console session.
telnet — Disconnects the Telnet session.
ftp — Disconnects the FTP session.
Page 416
Guide
Values file url:
local-url:
remote-url:
cflash-id:
usb-flash-id
Values
ipv4-address
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
7210 SAS M, T, X, R6 Basic System Configuration
local-url | remote-url: 255 chars max
[<cflash-id>/ | <usb-flash-id>][file-path], 200 chars max, including
the cflash-id directory length, 99 chars max each
[{ftp://} login:pswd@remote-locn/][file-path]
remote-locn [ hostname | ipv4-address]
ipv4-address a.b.c.d
255 chars max, directory length 99 chars max each
cf1:, cf2 (only on 7210 SAS-T)
uf1:
a.b.c.d
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D