Alcatel-Lucent 7210 SAS M Configuration Manual page 461

Parameters
num-resources — Specifies the maximum amount of resources for use by up-mep.
ipv6-ipv4-match-enable
Syntax ipv6-ipv4-match-enable
no ipv6-ipv4-match-enable
Context configure>system>resource-profile>ingress-internal-tcam>qos-sap-ingress-resource
Description User needs to allocate resources from the SAP ingress QoS resource pool for ipv6-criteria by using
the command "configure> system> resource-profile> ingress-internal-tcam> qos-sap-ingress-
resource> ipv6-ipv4-match-enable" before using IPv6 criteria SAP ingress QoS policies.
These resources can be shared with SAP ingress policies that use IPv4 criteria. For more details about
the resource allocation for ingress filter policy and fields available for use with ingress filter policy
please refer the 7210 SAS-M,X,T, and R6 Router Configuration user guide. For more details about
the resource allocation for SAP ingress QoS policy please refer to 7210 SAS-M and 7210 SAS-X
QoS user guide.
With the no form of the command, the software does not allocate any resources for use by ingress
SAP QoS policies using IPv6 criteria. If no resources are allocated for use, then software fails all
attempts to associate a service entity (For example: SAP, IP interface, etc.) with a ingress filter policy
using this match criteria.
Parameters
num-resources — Specifies the maximum amount of resources for use by this SAP ingress Qos policy
match criteria.max — It is a special keyword. If user specifies max, then the software allocates one
7210 SAS M, T, X, R6 Basic System Configuration Guide
Values
[0..2] (For 7210 SAS-X and R6)
[0..1] (For 7210 SAS-M and T)
chunk when the first SAP is associated with a SAP ingress QoS policy using this match criteria.
It continues to allocate resources to SAPs associated with SAP ingress QoS policy using this
criteria, as long as the total amount of resources allocated does not exceed the resources allocated
to SAP ingress QoS policies (configured with the command config> system> resource-profile>
ingress-internal-tcam> qos-sap-ingress-resource command) and chunks are available for use.
System Management
Page 461