Alcatel-Lucent 7210 SAS M Configuration Manual page 450

System Resource-Profile Commands
Syntax [no]
Context configure>system>resource-profile>egress-internal-tcam>acl-sap-egress
Description
Syntax [no]
Context configure>system>resource-profile>ingress-internal-tcam>acl-sap-ingress
Description
mac-ipv4-match-enable
Syntax [no] mac-ipv4-match-enable num-resources
Context configure>system>resource-profile>egress-internal-tcam>acl-sap-egress
Description
This command allows the user to allocate maximum resources for use by egress filter policies using
IPv4 criteria or MAC criteria. The resources allocated are allocated on a first-cum-first-serve basis
among service entities (For example: SAP, IP interface, etc) using IPv4 and MAC criteria egress filter
policies.
The resources cannot be shared with any other egress filter policies that specify other match criteria.
Please see the 7210 SAS Router Configuration guide for more information on resource allocation
details and fields available for use.
With the no form of the command, the software does not allocate any resources for use by egress filter
policies using MAC or IPv4 criteria. If no resources are allocated for use, then the software fails all
attempts to associate a service entity (e.g. SAP, IP interface, etc.) with a filter policy using this match
criteria.
Default mac-ipv4-match-enable 2 (to maintain backward compatibility with earlier releases)
Parameters
num-resources — Specifies the maximum amount of resources for use by this filter match criteria.
mac-ipv6-64bit-match-enable
Page 450
Guide
Values [0|2]
Default
0
7210 SAS M, T, X, R6 Basic System Configuration